With pull-up banners the graphic is stored in the base on a roller. The graphic is simply pulled up and secured by hooking it onto the supporting pole. The pull-up banner literally takes seconds to assemble and is supplied in a carry bag for easy transportation
The graphic itself is high quality print and highly durable. The pull-up banner is suitable for exhibitions, tradeshows, retail outlets, shopping centres, boardrooms and receptions. Thanks to the ink and materials we use the pull up banner can even be used for outdoor events. Thepull-up banner is available in two sizes:
Artwork Specifications:
Printomatic can work with virtually any file format however EPS or AI is the preferred format. Text needs to be turned into outlines to avoid any font substitution or other problems that might occur. When working with finished graphics please keep the minimum resolution at 150 Dpi at FINAL size for best results. If you are working with artwork that needs to be “blown up” to use on a bigger sign, please keep in mind that it is the Final graphic that needs to be at least 150 Dpi. This means that if you are doubling the size of your original graphic then the resolution of your original, will have to be at least 300 Dpi. (2 x 150).
Both CMYK and RGB are accepted. Our maximum width is 1200mm. Length can be up to 30 metres.
Always remember “The higher quality the file and resolution, the better the result will be for your product”
2000mm x 800mm
Visual graphic is 2000mm x 800mm.
Printed and cut graphic is 2075mm x 800mm with 15mm bleed being masked by the top rail and 60mm bleed being masked by the bottom part of the stand. Please avoid simply adding white to the top and bottom as some of this bleed will be seen.
1600mm x 600mm
Visual graphic is 1600mm x 600mm.
Printed and cut graphic is 1675mm x 600mm with 15mm bleed being masked by the top rail and 60mm bleed being masked by the bottom part of the stand. Please avoid simply adding white to the top and bottom as some of this bleed will be seen.
