Printomatic can work with virtually any file format however EPS or AI is the preferred format. Text needs to be turned into outlines to avoid any font substitution or other problems that might occur. When working with finished graphics please keep the minimum resolution at 150 Dpi at FINAL size for best results. If you are working with artwork that needs to be “blown up” to use on a bigger sign, please keep in mind that it is the Final graphic that needs to be at least 150 Dpi. This means that if you are doubling the size of your original graphic then the resolution of your original, will have to be at least 300 Dpi. (2 x 150).
Both CMYK and RGB are accepted. Our maximum width is 1200mm. Length can be up to 30 metres.
Always remember “The higher quality the file and resolution, the better the result will be for your product”
- Pull-up Banners
-
2000mm x 800mm
Visual graphic is 2000mm x 800mm.
Printed and cut graphic is 2075mm x 800mm with 15mm bleed being masked by the top rail and 60mm bleed being masked by the bottom part of the stand. Please avoid simply adding white to the top and bottom as some of this bleed will be seen.
1600mm x 600mm
Visual graphic is 1600mm x 600mm.
Printed and cut graphic is 1675mm x 600mm with 15mm bleed being masked by the top rail and 60mm bleed being masked by the bottom part of the stand. Please avoid simply adding white to the top and bottom as some of this bleed will be seen.
-
- X-Banners
- 1600mm x 600mm
Visual graphic is 1600mm x 600mm.
Keep in mind that eyelets are punched in at 30mm from the corners and edge. Take this in to consideration when designing your graphic so that no critical text or images are masked by the holes.
Adjustable X-banner
Size is adjustable so please discuss with your sales person what you need.
Keep in mind that eyelets are punched in at 30mm from the corners and edge. Take this in to consideration when designing your graphic so that no critical text or images are masked by the holes.Desktop X-Banner:
Visual graphic is 420mm x 230mm
Keep in mind that holes are punched in at 15mm from the corners and edge. Take this in to consideration when designing your graphic so that no critical text or images are masked by the holes.
- 1600mm x 600mm
- L-Banners
-
1600mm x 600mm
Visual graphic is 1600mm x 600mm.
Printed and cut graphic is 1640mm x 600mm with a 20mm bleed top and bottom. Please avoid simply adding white to the top and bottom as some of this bleed will be seen.
1200mm x 400mm
Visual graphic is 1200mm x 400mm.
Printed and cut graphic is 1240mm x 400mm with a 20mm bleed top and bottom. Please avoid simply adding white to the top and bottom as some of this bleed will be seen.
-
- Snap Frames
-
Please ensure there is no critical text or images within 5mm of the various sizes.
This is to allow for the material to be mounted inside the product.
-
- LED Light Boxes
- Please ensure there is no critical text or images within 5mm of the various sizes.
This is to allow for the material to be mounted inside the product.
- Please ensure there is no critical text or images within 5mm of the various sizes.
- Hanging Snap
- Please allow a 20mm bleed at the top and bottom for insertion in to the top and bottom rail. Please avoid simply adding white to the top and bottom as some of this bleed will be seen.
- Outdoor Banners
-
Our maximum width is 1170mm and length is up to 30 Metres.
Keep in mind that holes are punched around 30 mm from the corners and edge and that we double stitch 50mm all the way around. Take this in to consideration when designing your graphic so that no critical text or images are masked by the holes or stitching.
-
- Outdoor flags
-
Please see below template for design specification.
When designing graphics for double sided print, please take into consideration the different shapes, front and back.
-
